Dart Logo

DART USER GUIDE

Language >
English
|
Deutsche
|
Français
|
Español
Language:
English
Deutsche
– Coming Soon

Français
– Coming Soon

Español
– Coming Soon

Dart Pod Platform

USB to Micro USB Cable

Dart Pod

Dart Power Supply

Dart Pod Platform

USB to Micro USB Cable

Micro USB Charging Cable Illustration

Dart Pod

Dart Power Supply

Product Use

Installing Pod

Insert the Pod by dropping the magnetic base into the Power Supply until it clicks into place. Dart features a secure magnetic connection that makes switching between pods simple and discreet. To avoid residue buildup, remove the Pod from the Power Supply when not in use.

Activating Vaporizer

Inhale on the pod mouthpiece to activate the Power Supply. The LED on the Power Supply will illuminate to indicate activation. Each activation can last up to 10 seconds.

Charging Power Supply

Insert the included Micro USB to the bottom of the Dart Power Supply, then connect the USB to a power adapter or active USB port (not included). For the best performance, charge the Power Supply often after use. While the Power Supply is charging, the small LED on the device will light up and remain lit. Once the device reaches a full charge, the LED will turn off. If the device is plugged into an active USB port or wall adapter and the light is not lit, it has a full charge.

Depleting Pod

Pod is empty when vapor is no longer produced after activation. Due to headspace, the pod may still produce vapor after the reservoir appears empty because of out of view oil absorbed in the atomizer. Learn More

Depleting Pod

Remove the Pod from the Power Supply. Use a cotton swab dampened with diluted isopropyl rubbing alcohol to clean the exterior of the Pod, Power Supply, and contact points.
Previous slide
Next slide

Product Use

Installing Pod

Insert the Pod by dropping the magnetic base into the Power Supply until it clicks into place. Dart features a secure magnetic connection that makes switching between pods simple and discreet. To avoid residue buildup, remove the Pod from the Power Supply when not in use.

Activating Vaporizer

Inhale on the pod mouthpiece to activate the Power Supply. The LED on the Power Supply will illuminate to indicate activation. Each activation can last up to 10 seconds.

Charging Power Supply

Insert the included Micro USB to the bottom of the Dart Power Supply, then connect the USB to a power adapter or active USB port (not included). For the best performance, charge the Power Supply often after use. While the Power Supply is charging, the small LED on the device will light up and remain lit. Once the device reaches a full charge, the LED will turn off. If the device is plugged into an active USB port or wall adapter and the light is not lit, it has a full charge.

Depleting Pod

Pod is empty when vapor is no longer produced after activation. Due to headspace, the pod may still produce vapor after the reservoir appears empty because of out of view oil absorbed in the atomizer. Learn More

Depleting Pod

Remove the Pod from the Power Supply. Use a cotton swab dampened with diluted isopropyl rubbing alcohol to clean the exterior of the Pod, Power Supply, and contact points.
Previous slide
Next slide

FAQ

Frequently Asked Questions

The Dart Power Supply has exclusive compatibility with Dart CCELL® Pod Cartridges.

The LED light on the Dart device indicates the status and battery life of the device.

  • Dart uses a breath-activated, subtle LED light to indicate the device is in use.
  • When the battery is low, the LED light will flash 10 times.
  • When the battery begins to charge, the LED lights up and remains lit. When the battery reaches a full charge, the LED light will flash 20 times and then turn off.

You’ll Need:

  • Cotton swab
  • Small amount of alcohol
  • A careful hand
  1. Dip cotton swab in alcohol
  2. Remove the Cartridge from the Power Supply.
  3. Clean the contact points on the top of the device and the bottom of the cartridge. This will remove any oil or debris that may affect the contact points.
    • Avoid dropping the device.
    • Avoid exposure to moisture.
    • Do not attempt to repair or modify the device.
  1. It depends. Many variables affect how many puffs an individual cartridge can provide. Factors include the duration of inhalation and the type of plant-derived extract.

It depends on how long and how often the device is in use. A premium 480mAh rechargeable Li-ion battery powers the Dart. On average, the power supply provides enough energy to vaporize a half gram cartridge on a full charge cycle.

The typical estimated life of a Li-ion battery is about 300-500 full charge cycles. After 300 full cycles, a typical Li-ion battery will lose 20% of its capacity. It will continue to supply the same power but will not last as long between charges.

All Jupiter Research vaporizer devices shut off after 10 seconds of inhalation.

Contact Our Team