LXG 300 & 500
Filling Instructions

Learn how to fill and cap your LXG
All-In-One device.

LXG 300/500
Filling
Instructions

Learn how to fill and
cap your LXG
All-In-One device.

LiquidX Glass 300 & 500

Fill Instructions

Filling the Reservoir

Insert the blunt tip needle into the space between the airway and the outer wall of the reservoir. With the device held upright, press the syringe plunger to fill the reservoir with a measured 0.3mL or 0.5mL of oil.

Do not overfill or allow oil to enter the center airway.

Capping the Device

Immediately after filling, screw the mouthpiece clockwise until it is fully seated.

Failure to install the mouthpiece within 2 minutes of filling may result in leakage.

Allow For Headspace

Devices should stand for at least 30 minutes before use to allow the atomizer to saturate. More viscous fluids require more time. After a device is filled, the atomizer begins to absorb the oil. Due to its large size and porous ceramic wick, a CCELL® atomizer can absorb up to 0.15mL (30%) of a 0.5mL device. As the atomizer absorbs oil, headspace forms. Oil is still in the reservoir, but it's absorbed out of view.

All-In-One vaporizers are expendable and for a single use only​.

Do not refill or use cartridges with tobacco derived products.​

When cleaning the outer wall of the cartridge, use <75% isopropyl alcohol to avoid fogging.​

Previous slide
Next slide

LXG 300 & 500

Filling & Capping Instructions

Filling the Reservoir

Insert the syringe (blunt tip needle 14 ga. or smaller) into the space between the airway and the outer wall of the reservoir. With the device held upright, fill the reservoir with 0.3mL/0.5mL of oil.

Note: The syringe and needle may need to be warmed to improve fluid flow.

Do not overfill or allow oil to enter the center airway.

Capping the Device

Immediately after filling, screw the mouthpiece clockwise until it is fully seated.

Failure to install the mouthpiece within 2 minutes of filling may result in leakage.

Allow for headspace

All-In-Ones should stand for at least 30 minutes before use to allow the atomizer to saturate. More viscous fluids require more time. After a device is filled, the atomizer begins to absorb the oil. Due to its large size and porous ceramic wick, a CCELL® atomizer can absorb up to 0.15mL (30%) of a 0.5mL device. As the atomizer absorbs oil, headspace forms. Oil is still in the reservoir, but it's absorbed out of view.

All-In-One vaporizers are expendable vaporizers for single-use only​.

When cleaning the outer wall of the cartridge, use <75% isopropyl alcohol to avoid fogging.

Do not refill or use cartridges with tobacco derived products.

FAQ

Frequently Asked Questions

It depends on whether or not you have a rechargeable All-In-One vaporizer. Now that we offer larger capacity All-In-One devices, we have added a rechargeable feature to ensure every puff is accounted for. Enjoy!

It depends. Many variables affect how many activations an individual cartridge can provide. Factors include the duration of inhalation and the type of plant-derived extract.

Our cartridges vaporize oil at a consistent rate of 5mg per 3-second draw. Based on this level of consumption, a 0.5mL cartridge would last about 100 draws.

All-In-Onescontains an oversized battery to ensure full vaporization of the extract before disposal. Battery life depends on how long and how often the device is in use.

All Jupiter Research vaporizers shut off after 10 seconds of inhalation.

Contact Our Team